3DbyLeigh
The Cyclone: triple lift, triple track marble machine - 3D printed in any colour you like - can be personalised!
The Cyclone: triple lift, triple track marble machine - 3D printed in any colour you like - can be personalised!
Regular price
£40.00 GBP
Regular price
Sale price
£40.00 GBP
Unit price
per
Tax included.
Shipping calculated at checkout.
Couldn't load pickup availability
The 3D printed Cyclone: triple lift, triple track marble machine makes a great desktop toy and display piece. It is operated by hand and has a very smooth function as seen in the video (it is printed on a very precise Bambu Labs x1 Carbon 3D printer). It has 3 seperate tracks the marbles take to the base and the screw thread has 3 channels to lift 3 ball bearings at once. The tracks feature a spin funnel, a small jump and winding track. This marble run is absolutely mesmerising to watch and you can sit for some time just spinning the crank to make the ball bearings climb the srew and run down the tracks over and over again :)
Easy to assemble, simply insert the screw thread lift down the centre of the tower, pop the cap over the top and then push on the crank turning handle.
You can see a timelapse of this model being 3d printed here: https://youtu.be/Q3Qk-5jUB-Y
The Cyclone: triple lift, triple track marble machine is around 17cm high and around 19cm diameter and comes with 15x 8mm ball bearings
(it will take 7mm ball bearings/marbles too but no bigger than 8mm and smaller than 7mm drop out of the lift)
Due to the small size of the ball bearings this is not recommended for small children as they could be a choking hazard.
The Cyclone: triple lift, triple track marble machine can be printed any colour you like, the one in the photos is:
Primary colour: Galaxy Blue silk PLA filament - Towers and cap
Secondary colour: Rainbow Tri Red/Yellow/Blue silk PLA filament - Crank top and screw thread
Please choose your 2 colours in the listings drop down boxes
If there is a particular colour you want that is not in the list please message me as I can arrange to get it.
Please note with gradient filaments such as the camo, macaron and rainbow it is not possible to get an exact match for those in the images as the gradient changes as each model is printed. You will get colours from the range shown but not necessarily in exactly the same places on the model.
A small personalised logo or message can also be added to the top of the crank (maybe a name, birthday message, logo etc)
Printed with high quality PLA filament and finished to a very high standard, this model takes a full day to print all the components.
It is printed with 3 walls and 10% infill to make a robust model.
Printed with plant based PLA filament these models are biodegradable. As with all 3D prints layer lines are visible and there may be the odd small imperfection in the printing process but these do not take away from awsomeness of the finished product
If you have any special requests for specific colours, models, sizes or paint schemes please message me as I am happy to accomodate most requests if possible.
Design of The Cyclone: triple lift, triple track marble machine by mroek licensed under the Creative Commons - Attribution license.
Easy to assemble, simply insert the screw thread lift down the centre of the tower, pop the cap over the top and then push on the crank turning handle.
You can see a timelapse of this model being 3d printed here: https://youtu.be/Q3Qk-5jUB-Y
The Cyclone: triple lift, triple track marble machine is around 17cm high and around 19cm diameter and comes with 15x 8mm ball bearings
(it will take 7mm ball bearings/marbles too but no bigger than 8mm and smaller than 7mm drop out of the lift)
Due to the small size of the ball bearings this is not recommended for small children as they could be a choking hazard.
The Cyclone: triple lift, triple track marble machine can be printed any colour you like, the one in the photos is:
Primary colour: Galaxy Blue silk PLA filament - Towers and cap
Secondary colour: Rainbow Tri Red/Yellow/Blue silk PLA filament - Crank top and screw thread
Please choose your 2 colours in the listings drop down boxes
If there is a particular colour you want that is not in the list please message me as I can arrange to get it.
Please note with gradient filaments such as the camo, macaron and rainbow it is not possible to get an exact match for those in the images as the gradient changes as each model is printed. You will get colours from the range shown but not necessarily in exactly the same places on the model.
A small personalised logo or message can also be added to the top of the crank (maybe a name, birthday message, logo etc)
Printed with high quality PLA filament and finished to a very high standard, this model takes a full day to print all the components.
It is printed with 3 walls and 10% infill to make a robust model.
Printed with plant based PLA filament these models are biodegradable. As with all 3D prints layer lines are visible and there may be the odd small imperfection in the printing process but these do not take away from awsomeness of the finished product
If you have any special requests for specific colours, models, sizes or paint schemes please message me as I am happy to accomodate most requests if possible.
Design of The Cyclone: triple lift, triple track marble machine by mroek licensed under the Creative Commons - Attribution license.
